Lee Auto-Disk Powder Measure Riser

The Lee Auto-Disk Powder Measure is value packed. Not every reloader using the Auto-Disk powder measure uses Lee dies on their progressive or turret press so Lee created this riser. This Auto-Disk Powder Measure Riser allows reloaders using alternate brands of dies with extended adjusting screws the ability to use the Lee Auto-Disk Powder Measure. When coupled with the Lee Auto Disk Powder Measure this riser holds the powder measure above the extended adjusting screws and out of contact with the Lee Safety Prime System eliminating the chances of the powder measure coming into contact with the safety prime system.

Function: Raises the powder measure above its original mounting position to clear reloading dies and Safety Prime System
Notes:

• Raises the Auto Disk Powder Measure higher above the original mounting location on a reloading press
• Allows the reloader to use other brands of dies that have extended adjusting screws
• The riser is not necessary if using Lee dies with the Auto Disk Measure only
• If using the Lee Safety Prime system this riser is required to raise the Auto Disk Powder Measure above the Lee Safety Prime System